|BMW||1 Series (pre-Aug. 2010)||2008-2010|
|BMW||3 Series (pre-Sep. 2009)||2007-2009|
|BMW||5 Series (pre-Aug. 2010)||2006-2010|
|BMW||7 Series (pre-Aug. 2010)||2006-2010|
|BMW||M3 (pre-Sep. 2009)||2004-2009|
|BMW||M5 (pre-Aug. 2010)||2006-2010|
|BMW||X3 (pre-Aug. 2010)||2006-2010|
|BMW||X5 (pre-Aug. 2010)||2005-2010|
|BMW||X6 (pre-Aug. 2010)||2008-2010|
|BMW||Z4 (pre-Aug. 2010)||2003-2010|
This Huf 433 MHz tire pressure sensor is for use by the TPMS in some BMW models. Please refer to our fitment guide for specific Year and Model applications.
|Sensor Frequency||433 MHz|
|Replaces OE Part Number||36236781847, 6781847-02|
|Relearn Procedure||IMPORTANT: Before following the relearn procedure, please be sure to move the old sensors at least one hundred feet away from the car. Inflate all tires to pressure indicated on tire placard. <P>If equipped with iDrive: 1. Turn ignition to ON position (engine off). 2. Press iDrive controller to use “i” menu. 3. Select SETTINGS, press iDrive controller. 4. Select CAR/TIRES, press iDrive controller. 5. You may need to switch to the top field, select TIRES: RDC, and press iDrive controller. 6. Start engine. 7. Select CONFIRM TIRE PRESSURE, press iDrive controller. 8. Vehicle must be driven to complete relearn.</P><P>If not equipped with iDrive: 1. Start engine. 2. Hold turn signal lever in the up or down position until TPMS telltale and RESET are displayed. 3. Press button at end of turn signal lever. 4. Press and hold button at end of turn signal lever until a check appears after RESET. 5. Vehicle must be driven to complete relearn.</P>|
This product ships for free. Need it right away? Contact one of our Wheel Specialists toll-free at 866-273-3651 and ask about Express Shipping!