Huf RDE048 433 MHz TPMS Sensors for Audi
$78.50
UPC: 9457584
DISCLAIMER: All information is to be used as a reference only. Vehicle information is compiled from available manufacturer sources. The application information presented in this document is accurate to the best of our knowledge and is regularly updated with the latest data available in the marketplace. Due to the vast number of car models and spare parts from numerous vehicle manufacturers the exact application of parts is not always feasible. Damage claims, installation fees or removal fees on the basis of data in this listing will not be considered.
| Make | Model | Year |
|---|---|---|
| Audi | A4 | 2002-2008 |
| Audi | A6 (excludes Allroad before May 2009) | 2004-2009 |
| Audi | Q7 | 2007-2009 |
| Audi | R8 | 2008-2012 |
| Audi | R8 | 2014-2017 |
| Audi | RS4 | 2007-2008 |
| Audi | RS7 | 2014-201 |
| Audi | S4 | 2002-2009 |
| Audi | S6 (before May 2009) | 2007-2009 |
This Huf RDE048 433 MHz tire pressure sensor is for use by the TPMS in some Audi models. Please refer to our fitment guide for specific Year and Model applications. 
| Item ID | TPMS-Huf-RDE048 |
| Sensor Frequency | 433 MHz |
| Replaces OE Part Number | 4F0907275B |
| Relearn Codes | AU-1, AU-2, AU-3 |
| Relearn Procedure | IMPORTANT: Before following the relearn procedure, please be sure to move the old sensors at least one hundred feet away from the car. 1. Inflate all tires to pressure listed on tire placard. 2. Hold down RESET button (on end of wiper lever) until DISPLAY TYPE is displayed. 3. Press button on end of wiper lever to select SET. 4. Press RESET button. 5. Press button on end of wiper lever to select TIRE PRESSURE. 6. Press RESET button. 7. Press button on end of wiper lever to select WHEEL CHANGE (select STORE PRESSURES if resetting air pressure). 8. Press RESET button. Relearn can take 20 minutes to complete. |
This product ships for free. Need it right away? Contact one of our Wheel Specialists toll-free at 866-273-3651 and ask about Express Shipping!
