4Play Gunmetal Machined Face Custom Wheel fits GM 6-Lug 20x9

$210.25
UPC: 9506638
(0) No Reviews yet
$210.25

DISCLAIMER: This wheel is not affiliated with General Motors Corporation in any way or form. The terms "Corvette", "Camaro", "Firebird", "TransAm", "Cadillac" and "ZO6, C5, C6, ZR1" are used for fitment and descriptive purposes only. O. E. Wheel Distributors, LLC states that our use of the General Motors Corporation trademarked terms in our product descriptions constitute fair use and nominative use and is in no way to offer confusion that O. E. Wheel Distributor's products and General Motors products are related or their companies.

MakeModelYear
CadillacEscalade1999-2017
ChevroletAvalanche 15002002-2013
ChevroletC25001988-2000
ChevroletExpress 15002003-2014
ChevroletSilverado 15001999-2017
ChevroletSuburban 15001988-2017
ChevroletTahoe1995-2017
GMCSavana 15002003-2014
GMCSierra 15001999-2017
GMCYukon 15001992-2017

WILL NOT FIT: Suburban C1500 1988-1999, Tahoe 2WD 1995-1999, Yukon 2WD 1992-1999, Escalade Hybrid. With aftermarket wheels you should have a certified installer TEST FIT one wheel on the front and rear of your vehicle, ROTATE 360 degrees, and check for proper clearances BEFORE mounting tires. This wheel requires conical seat lugs with a 60° taper. Please verify your vehicle’s lug specations prior to purchase.

This version of the 4Play Gambler is a 20" x 9" 6-lug gunmetal alloy aftermarket wheel designed to fit GM trucks with a 6 x 5.5 bolt pattern. With a machined face and a strong profile, Gambler is available for Ford and GM trucks with a 6 lug configuration and a 9" or 10" width, so please check our fitment guide carefully. If you need help finding the right size for your truck, give us a call at 866-273-3651.



This wheel requires conical seat lugs with a 60° taper. Please verify your vehicle’s lug specations prior to purchase.

Item IDFP07-20090-6550-0MG
Wheel Size20x9
Bolt Pattern6-139.7
Hub Size78.1
Back Spacing5
Center CapsCenter cap included.
Gunmetal with a machined face: The finish on this wheel is achieved through several different phases. The finishing process begins with a gunmetal powder coat applied to the wheel. The face of the wheel is then precision machined using a coolant and ceramic bit. This method leaves the gunmetal powder coat in the recessed areas between the spokes while creating a fine machined aluminum appearance on the face of the wheel. The final stage consists of two layers of clear coat. This wheel has a very professional appearance.
This product ships for free. Need it right away? Contact one of our Wheel Specialists toll-free at 866-273-3651 and ask about Express Shipping!

Ratings & Reviews

No reviews available

Be the first to Write a Review