TPMS fits Mercedes Benz S320 1999 - Tire Pressure Sensors SET
DISCLAIMER: All information is to be used as a reference only. Vehicle information is compiled from available manufacturer sources. The application information presented in this document is accurate to the best of our knowledge and is regularly updated with the latest data available in the marketplace. Due to the vast number of car models and spare parts from numerous vehicle manufacturers the exact application of parts is not always feasible. Damage claims, installation fees or removal fees on the basis of data in this listing will not be considered.
|Sensor Frequency||433 MHz|
|Replaces OE Part Number||8223306|
|Relearn Procedure||IMPORTANT:Before following the relearn procedure, please be sure to move the old sensors at least one hundred feet away from the car. RESET AIR PRESSURE 1. Inflate all tires to pressure listed on tire placard. 2. Turn ignition to ON position (engine off). 3. Press forward/back button on steering wheel until trip and odometer are displayed. 4. Press UP/DOWN button until tire inflation pressure monitor is displayed. 5. Hold down reset button (located on instrument cluster) until MONITOR CURRENT TIRE PRESSURE? Is displayed. 6. Press + button TIRE PRESS, MONITOR ACTIVATED-PRESS. DISPLAY AFTER DRIVING A FEW MINS. is displayed. 7. If REACTIVATE-TIRE PRESS. MONITOR! Appears, repeat relearn procedure. 8. If CHECK TIRES! appears, indicates tire pressure too low, adjust pressures accordingly. <P>Relearn New Sensor Ids Ensure all tires are inflated to the pressure listed on the tire placard. Vehicle must be driven for at least 10 minutes, while maintaining speed above 15 mph in order for system to learn new sensor IDs. If spare tire sensor ID is being programmed, a properly formatted scan tool is necessary. </P>|