TPMS fits Mazda Tribute 2011 - Tire Pressure Sensors Set
DISCLAIMER: All information is to be used as a reference only. Vehicle information is compiled from available manufacturer sources. The application information presented in this document is accurate to the best of our knowledge and is regularly updated with the latest data available in the marketplace. Due to the vast number of car models and spare parts from numerous vehicle manufacturers the exact application of parts is not always feasible. Damage claims, installation fees or removal fees on the basis of data in this listing will not be considered.
|Sensor Frequency||315 MHz|
|Replaces OE Part Number||9L3Z-1A189-A,9L3T-1A180-A, 6F2Z-1A189-A, 6F2A-1A176-AE, 6F2T-1A150-AE, 6L2A-1A176-AF, 6W1T-1A150-AF, 7L1Z-1A189-A, DE8T1A180AA, CM5T1A180AA, ZZDA37140|
|Relearn Procedure||IMPORTANT: Before following the relearn procedure, please be sure to move the old sensors at least one hundred feet away from the car. 1. Inflate all tires to pressure indicated on tire placard. 2. Turn ignition to OFF position and press and release the brake pedal. 3. Cycle ignition from OFF to RUN position 3 times, ending in RUN position. 4. Press and release brake pedal. 5. Turn ignition to OFF position. 6. Cycle ignition from OFF to RUN position, 3 times ending in RUN position. 7. Horn will sound once and TPMS telltale will blink once train mode is initiated. If equipped with message center, it will display TRAIN LF TIRE. Place antennae of learn tool on side wall of LF tire 180 degrees from valve stem to activate sensor. Horn will sound once sensor has been recognized, Repeat step for RF, RR and LR tires. 8. After training LR tire, the message center will display TRAINING MODE COMPLETE. If the vehicle is not equipped with the message center display, successful completion can be verified by turning the ignition to the OFF position and not hearing the horn sound. If the horn sounds, the training procedure must be repeated.|