TPMS fits GMC Sierra 2008 - Tire Pressure Sensor
DISCLAIMER: All information is to be used as a reference only. Vehicle information is compiled from available manufacturer sources. The application information presented in this document is accurate to the best of our knowledge and is regularly updated with the latest data available in the marketplace. Due to the vast number of car models and spare parts from numerous vehicle manufacturers the exact application of parts is not always feasible. Damage claims, installation fees or removal fees on the basis of data in this listing will not be considered.
|Sensor Frequency||315 MHz|
|Replaces OE Part Number||15268606, 15921013, 10394110, 12768826, 20922900, 20923680, 20925924, 25799331, 20923680, 25920615, 13586335|
|Relearn Procedure||IMPORTANT: Before following the relearn procedure, please be sure to move the old sensors at least one hundred feet away from the car. 1. Apply parking brake. Turn ignition to ON position (engine off). 2. Turn headlight switch from OFF to parking lamps 4 times within 4 seconds. A double horn chirp will sound and the TPMS telltale will begin blinking to indicate the learn mode is enabled. 3. Starting at the LF tire increase/decrease pressure until horn sounds. 4. After horn sounds, proceed as in step 3 for the next 3 sensors in the following order : RF, RR LR. 5. After LR sensor has been learned, turn ignition to OFF position. Adjust all tires to pressure listed on tire placard. *If headlight switch does not enable TPMS Learn Mode, use TPMS Learn button on dash.|