TPMS fits Ford® Expedition 2004 - Tire Pressure Sensor
DISCLAIMER: All information is to be used as a reference only. Vehicle information is compiled from available manufacturer sources. The application information presented in this document is accurate to the best of our knowledge and is regularly updated with the latest data available in the marketplace. Due to the vast number of car models and spare parts from numerous vehicle manufacturers the exact application of parts is not always feasible. Damage claims, installation fees or removal fees on the basis of data in this listing will not be considered.
|Sensor Frequency||433 MHz|
|Replaces OE Part Number||4L2T1A150BA, 4L2Z1A150BA, 2L2Z1A150AA|
|Relearn Procedure||IMPORTANT: Before following the relearn procedure, please be sure to move the old sensors at least one hundred feet away from the car. 1. Inflate all tires to pressure listed on tire placard. 2. Turn ignition to OFF position. 3. Cycle ignition from OFF to RUN position 3 times, ending in RUN position. 4. Press and release brake pedal. 5. Turn ignition to OFF position. 6. Cycle ignition from OFF to RUN position 3 times ending in RUN position. 7. Horn will sound once and TPMS telltale will blink once train mode is initated, if equippped with message center it will display TRAIN LF TIRE. Place relearn magnet on LF sensor when horn sounds. 8. Proceed as in step 6 for the next 3 sensors in the following order RF RR and LR. 9. After training LR the horn will sound and message center will display TIRE TRAINING MODE COMPLETE if equipped.|