TPMS fits Chrysler Concorde 2003 - Tire Pressure Sensors SET
DISCLAIMER: All information is to be used as a reference only. Vehicle information is compiled from available manufacturer sources. The application information presented in this document is accurate to the best of our knowledge and is regularly updated with the latest data available in the marketplace. Due to the vast number of car models and spare parts from numerous vehicle manufacturers the exact application of parts is not always feasible. Damage claims, installation fees or removal fees on the basis of data in this listing will not be considered.
|Sensor Frequency||433 MHz|
|Replaces OE Part Number||5208-8990AC|
|Relearn Procedure||<b>IMPORTANT:</b> Before following the relearn procedure, please be sure to move the old sensors at least one hundred feet away from the car.<BR><BR>1. Set parking brake.<br>2. Turn ignition to ON/RUN (engine off).<br>3. Use the MENU button to select the Vehicle Information menu in the Driver Information Center (DIC).<br>4. Use thumbwheel to scroll to the Tire Pressure menu item screen.<br>5. Press the SET/CLR button to begin sensor matching process. A message requesting acceptance of the process should display.<br>6. Press the SET/CLR button again to confirm selection.<br>7. Starting with LF tire, Increase/decrease tire pressure until horn sounds, or use TPMS relearn tool to activate each sensor.<br>8. After horn sounds proceed as in step 5 for the next 3 sensors in the following order: RF, LF, LR. After completing LR tire, horn will sound twice.<br>9. Turn Ignition to off position to exit vehicle learn mode. Adjust all tires to pressure listed on tire placard.|