Machined Face Gunmetal Truck Wheels for Chevy & GMC 6-Lug 20x9 SET

UPC: 9507670
(0) No Reviews yet

DISCLAIMER: This wheel is not affiliated with General Motors Corporation in any way or form. The terms "Corvette", "Camaro", "Firebird", "TransAm", "Cadillac" and "ZO6, C5, C6, ZR1" are used for fitment and descriptive purposes only. O. E. Wheel Distributors, LLC states that our use of the General Motors Corporation trademarked terms in our product descriptions constitute fair use and nominative use and is in no way to offer confusion that O. E. Wheel Distributor's products and General Motors products are related or their companies.

CadillacEscalade (Excludes 2009-2015 Hybrid)1999-2016
ChevroletC2500 (2WD)1988-2000
ChevroletExpress 15002003-2014
ChevroletSilverado 15001999-2016
ChevroletSuburban 15002000-2016
ChevroletSuburban C25001992-1999
ChevroletSuburban K15001992-1999
ChevroletTahoe (4WD)1995-1999
GMCSavana 15002003-2008
GMCSierra 15001999-2016
GMCYukon (4WD)1992-1999
GMCYukon XL 15002000-2016

Our technicians go to great lenghts to continuously review and update our fitment information to ensure accuracy. However, it is the customer’s responsibility to ensure fitment before mounting a tire. As noted on our boxes, you should have a certified installer TEST FIT one wheel on the front and rear of your vehicle, ROTATE 360 degrees, and check for proper clearances BEFORE mounting tires.

This version of the 4Play Gambler is a set of four 20" x 9" 6-lug gunmetal alloy aftermarket wheels designed to fit GM trucks with a 6 x 5.5 bolt pattern. With a machined face and a strong profile, Gambler is available for Ford and GM trucks with a 6 lug configuration and a 9" or 10" width, so please check our fitment guide carefully. If you need help finding the right size for your truck, give us a call at 866-273-3651.
Item IDSET-FP07-20090-6550-0MG
Wheel Size20x9
Bolt Pattern6-139.7
Hub Size78.1
Back Spacing5
Center CapsCenter cap included.
Gunmetal with a machined face: The finish on this wheel is achieved through several different phases. The finishing process begins with a gunmetal powder coat applied to the wheel. The face of the wheel is then precision machined using a coolant and ceramic bit. This method leaves the gunmetal powder coat in the recessed areas between the spokes while creating a fine machined aluminum appearance on the face of the wheel. The final stage consists of two layers of clear coat. This wheel has a very professional appearance.

Ratings & Reviews

No reviews available

Be the first to Write a Review